Home > Lithium Battery Module >

12V Rechargeable Lithium Battery Module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah / 300Ah

Product Categories

Shenzhen Topband Battery Co., Ltd

Contact Now

300Ah

Ask Lasest Price
Brand Name :	Topband
Model Number :	TB-lithium battery module
Certification :	ISO9001/ISO14001
Supply Ability :	450Mwh/year
Delivery Time :	2~4weeks for samples; 4~6weeks for mass production
Price :	Negotiable
Payment Terms :	L/C, T/T

Add to Cart

Product Details
Company Profile

12V Rechargeable Lithium Battery Module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah / 300Ah

12V rechargeable LiFePO4 lithium battery module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah / 300Ah

1. Lithium battery module advantage

A. Extremely safe and stable chemistry: PCB and/or BMS built inside to balance protect the battery.
B. Long life-cycle: Can be circularly used, best can up to 2000 times recycles, 8 times of Lead acid battery.
C. Lighter weight, with the best power-to-weight ratio: 1/3 of Lead acid battery weight.
D. Good performance at high temperature and high temperature resistance
E. Low self-discharge rate, less than 3% monthly.
F. No memory effects and highly efficient charge.
G. Environment friendly: Clean and Green energy poses no pollution on our environment.

2. Lithium battery module can be assembled with various cells,

Available to make all customzied battery pack. Cell's details as below:

3.2V Lithium Iron Phosphate Cells
Cell Model	Volt(V)	Capacity(Ah)	Inpendance(mΩ)	Weight(g)	Cycle life	Cycle condition
TB-01865135C-12Ah	3.2V	12Ah	≤12	310±10	2000 cycles	100% DOD
TB-02707145C-20Ah	3.2V	20Ah	≤10	525±10	2000 cycles	100% DOD
TB-02707145D-20Ah	3.2V	20Ah	≤4	525±10	2000 cycles	100% DOD
TB-02707180C-25Ah	3.2V	25Ah	≤6	650±10	2000 cycles	100% DOD
TB-02707180D-25Ah	3.2V	25Ah	≤4	650±10	2000 cycles	100% DOD
TB-02707180C-27Ah	3.2V	27Ah	≤4	660±10	2000 cycles	100% DOD

3. Electrical Characteristics

4. Safety Test

No.	Item	Test Method	Criteria
4.1	Short- circuit Test	A cell is tested in accordance with 3.2, after that the cell is short-circuited by connecting the positive and negative terminals with a wire for 10min, the wire has a maximum resistance load of 5mΩ., then observe for 1h.	No fire, no explosion
4.2	Overcharge Test	A cell is tested in accordance with 3.2, then 1C constant current charged till the voltage reaches 1.5 times of the specified end-off charge voltage, or the charge time reaches 1h, then stop charge, and observe for 1h.	No fire, no explosion
4.3	Over discharge test	A cell is tested in accordance with 3.2, then 1C discharge for 90min, then observe for 1h.	No fire, no explosion, no leakage
4.4	Crush Test	A cell is tested in accordance with 3.2, and then is placed on the crush machine, the axis is parallel to the crush equiment, and it is crushed between two flat surfaces till the crushing force is gradually approaching 200 kN, or voltage reaches 0V,or reaches 30% distortion, then observe for 1h.	No fire, no explosion
4.5	Impact Test	A cell is tested in accordance with 3.2, and then placed on the impact flat. A Φ15.8mm bar is to be placed on the center of the cell. A 9.1kg weight is dropped from a height of 610mm onto the cell, the distortion is allowed.	No fire, no explosion
4.6	Stick Test	a) A cell is tested in accordance with 3.2 b) use φ5mm～φ8mm high temperature resistance steel needle, with speed of 25±5mm/s, to go through the cell from vertical direction of pole plate, the penetrate position should be close to the geometric center of plate surface, the steel needle remains in the cell;	No fire, no explosion
4.7	Heating Test(130℃)	A cell is tested in accordance with 3.2, and then heated in a circulating air oven. The temperature of the oven is raised at a rate of 5℃ per minute to 130℃±3℃ and remain for 30 min.	No fire, no explosion

5. Our Service

Customized is allowed;
Support imprint your logo on products;
OEM
Products have proceeded comprehensive testing before shipment

6. Application

EV: pure electric car, pure electric bus, hybrid electric vehicles, hybrid electric bus, recreational vehicles, chill cars.
Storage: solar and wind complementary stored energy streetlights, energy storage systems, household energy storage.
Power Supply: communication base station power supply, utility power supply, communication industry, emergency power supply and other system standby power etc.

Product Tags:

Lithium Ion Battery Module

Battery Backup Module

12V Rechargeable Lithium Battery Module 20Ah / 50Ah / 100Ah / 150Ah / 200Ah / 300Ah

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Shenzhen Topband Battery Co., Ltd
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

Explore more Lithium Battery Module products from this supplier

Find Similar Products By Category:

Electrical Equipment & Supplies

Hot Searches: